HTW Steam Wallpaper Stripper

CATEGORIES

Features:

The HTW Steam Wallpaper Stripper designed for the tool rental and professional decorating markets, is the most productive, safest and easiest to use steam wallpaper stripper.

The HTW produces steam at just the right pressure and temperature for fast effective stripping with the minimum of condensation. This critical design feature reduces the risk of over-wetting wallboard or the plaster surface of the wall being stripped, and keeps the working environment comfortable.

A unique, two-stage anti-scald system prevents the sudden escape of hot steam and water should the user tamper with the steam cap when the steamer is in use.

Simply fill with hot or cold tap water and connect to the power supply. The HTW-5 will steam-up in 10 to 25 minutes and continue to run for up to an hour and a half before switching off automatically when a low water level is reached.

The user then simply disconnects the HTW from the power supply, waits 2 minutes to allow the steamer to cool, and then refills. This eliminates the need for the user to remember to constantly check the water level and removes the need for troublesome switches, buzzers or sight glasses. Even if the HTW is left connected to the power supply with a low water level it will safely switch on and off as the heating element cools down and heats up.

The hot steam tank, made from marine grade alloy that will not rust, is fully shielded from the user while four castors provide excellent mobility. These features make the HTW easy to move around the work site without the risk of picking up the steam stripper when it is in operation or when the tank is still hot after use.

Completely self contained with no loose parts, the HTW will remove vinyl, foil, flock, woodchip and multi-layered papers, including painted-over wallpaper, with ease. The HTW is even effective on non-paper based wall coverings such as hessian fixed with UPVA glues.

  • Simply plug and strip with thermal cut-out.
  • Anti scald system.
  • Stainless steel heater element.
  • Completely self contained.
  • Covered steam tank.
  • 4 castors for easy mobility.
  • Marine alloy steam tank.
  • 2 year warranty.

Item Numbers  Packaging and Availability

Item #Description
07181SAFETY VENTED
CATEGORIES

Applications:

All Pipeline Applications

Item Numbers  Packaging and Availability

Item #SizeGrit SizeRPMPkg. Qty.Availability
DXA2730P04A4” x .156” x 5/85015,3001NON-STOCK
DXA2730P45H4.5” x .156” x 5/8-115013,6001NON-STOCK
DXA2730P05H5” x .156” x 5/8-115012,2251NON-STOCK
DXA2730P06H6” x .156” x 5/8-115010,2001NON-STOCK
DXA2730P07H7” x .156” x 5/8-11508,6001NON-STOCK
DXA2730P09H9” x .156” x 5/8-11506,6001NON-STOCK
CATEGORIES

Tungsten carbide tipped power hack saw blades designed for production application, cutting most types of metals including alloy and stainless steel.

The design of the teeth we first used for a project for the British Army where we needed to cut hydraulic pipes and was proved very successful.

The tungsten carbide teeth offer a prolonged lifetime of the blade thereby providing an economical cutting rate.

Made in Denmark

Item Numbers  Packaging and Availability

Item #DescriptionSizePkg. Qty.Availability
DT300BLACK LABEL12 1STOCK
DT301BLACK LABEL14 17-21 DAYS
DT302BLACK LABEL16 17-21 DAYS
DT303BLACK LABEL18 7-21 DAYS
DT304BLACK LABEL20 17-21 DAYS
DT305BLACK LABEL22 17-21 DAYS
DT306BLACK LABEL23 7-21 DAYS
DT307BLACK LABEL24 17-21 DAYS
DT308BLACK LABEL26 17-21 DAYS
DT309BLACK LABEL28 17-21 DAYS
CATEGORIES

High tech self sharpening Ceramic grain for ultimate performance. TOP-SIZE coat for cool cutting, load resisting and long life. For industrial use on high power angle grinders. Do not use without BACK-UP pad. Firm BACK-UP pad and high pressure recommended.

Made in Germany

Suitable for the following materials:

  • All Steels
  • Stainless Steel
  • Extremely Hard Steels
  • High Speed and Tool Steels
  • Exotic Alloys
  • Sheet Metal
  • Non-Ferrous Metals

Specifications

SIZES4" / 4 1/2" / 5" / 7" / 9"TYPE:C870
ABRASIVE MATERIAL:Premium Ceramic Top-SizedSHAPES:OTHER SHAPES AVAILABLE, PLEASE CONTACT CUSTOMER SERVICE
GRITS:16 / 24 / 36 / 50 / 60 / 80 / 100 / 120COLOUR:Red
BACKING:BACK-UP PAD REQUIREDQUICK CHANGE:5/8-11 Quick Change Hub available for 7/8" AH
MAX RPM. (OD in inches - RPM)4" - 15,300 / 4 1/2" - 13,300 / 5" - 12,200 / 7" - 8,500 / 9" - 6,650

Item Numbers  Packaging and Availability

Item #SizeGritTypePkg. Qty.Availability
2C7545024 1/2 x 7/824C87025STOCK
2C7545034 1/2 x 7/836C87025STOCK
2C7545054 1/2 x 7/850C87025STOCK
2C7545064 1/2 x 7/860C87025STOCK
2C7545084 1/2 x 7/880C87025STOCK
2C7545104 1/2 x 7/8100C87025STOCK
2C7545124 1/2 x 7/8120C87025STOCK
2C7550025 x 7/824C87025STOCK
2C7550035 x 7/836C87025STOCK
2C7550055 x 7/850C87025STOCK
2C7550065 x 7/860C87025STOCK
2C7550085 x 7/880C87025STOCK
2C7550105 x 7/8100C87025STOCK
2C7550125 x 7/8120C87025STOCK
2C7570027 x 7/824C87025STOCK
2C7570037 x 7/836C87025STOCK
2C7570057 x 7/850C87025STOCK
2C7570067 x 7/860C87025STOCK
2C7570087 x 7/880C87025STOCK
2C7570107 x 7/8100C87025STOCK
2C7570127 x 7/8120C87025STOCK

For Item with 5/8″-11 Quick Change Hub remove 2 in the front and add L to the end of Item Number with 7/8″ Arbor Hole. e.g. Item: 2C754502 with 7/8″ AH will become C754502L with 5/8″-11 Quick Change Hub. Quick Change Hub available only for discs with 7/8 Arbor Hole.

CATEGORIES

SANDING DISC

Carbide tools give a powerful “True Grit” performance – on both wet and dry materials. The highly wear-resistant abrasive
lasts up to 150 times longer than sandpaper, and is far more effective and time-saving than traditional grinding methods.

Suitable for the following materials:

  • Cement
  • Plaster
  • Drywall
  • Concrete
  • Tile and clinker
  • Marble
  • PVC
  • Rust/paint on metal
Item #SizeGritPkg. Qty.Availability
3010.125.001.0144 1/2 X 114107-21 DAYS
3010.125.001.0244 1/2 X 124107-21 DAYS
3010.125.001.0364 1/2 X 136107-21 DAYS
3010.125.001.0604 1/2 X 160107-21 DAYS
3010.150.001.0146 X 114107-21 DAYS
3010.150.001.0246 X 124107-21 DAYS
3010.150.001.0366 X 136107-21 DAYS
3010.150.001.0606 X 160107-21 DAYS
3010.180.001.0147 X 114107-21 DAYS
3010.180.001.0247 X 124107-21 DAYS
3010.180.001.0367 X 136107-21 DAYS
3010.180.001.0607 X 160107-21 DAYS
CATEGORIES

Item Numbers  Packaging and Availability

Item #SizeMax RPMTypePkg. Qty.Availability
DRPEEX2103M2 x 1/32 x 3/831,0001/4150STOCK
DRPEEX3103M3 x 1/32 x 3/825,0001/4150STOCK
DRPEEX3163M3 x 1/16 x 3/825,0001/4150STOCK
DRPEEX3303M3 x 1/8 x 3/825,0001/4150STOCK
DRPEEX4103M4 x 1/32 x 3/819,3001/4150STOCK
DRPEEX4163M4 x 1/16 x 3/815,3001/4150STOCK

g1 blank

For Item with 5/8″-11 Zinc Hub add 5811 to the of Item with 7/8″ Arbor Hole. e.g. Item: DRDEMT2607K with 7/8″ AH will become DRDEMT2607K5811 with 5/8″-11 Zinc Hub.

CATEGORIES
CATEGORIES

Premium quality Zirconia Flap Disc. Made with genuine VSM ZK765X  Zirconia Abrasive Material for best performance on all materials  and angle grinders. Fibreglass Backing. Shrink wrapped in 5/10s.

Recommended for frequent use by professionals who do not compromise on quality and are looking at great price over performance ratio.

ZeeCUT Flap Discs are manufactured using the highest quality Self-Sharpening Zirconia Alumina abrasive material.

Discs made with continuous self-sharpening High-Tech Zirconia Alumina grain, achieve extremely high cutting rates, long lifetimes, better surface finish, and better economy.

buyersguide_abrasivematerial

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Heat treated steels
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Cast iron
  • Non-Ferrous metals

Depending on the grinding angle and surface to be ground, Flap Discs are available in two types:

Type 27 – has flat surface and can achieve maximum efficiency when applied at a work angle of 0-15 deg angle. These discs are the most suitable for grinding flat surfaces.

t27-fd

Type 29 – has a slightly conical surface, for grinding at 10-25 deg angle. These discs are the most suitable for grinding contoured surfaces.

t29-fd

Specifications

SIZES4 1/2 x 5/7"/ 5 7/8"TYPE:Flat (Type 27) / Conical (Type 29)
ABRASIVE MATERIAL:VSM Premium ZirconiaDENSITY:Standard
GRITS:36 / 40 / 60 / 80 / 120COLOUR:Green
BACKING:FiberglassQUICK CHANGESAFE LOC / ZINC HUB
MAX RPM. (OD in inches - RPM)4" - 15,300 / 4 1/2" - 13,300 / 5" - 12,200 / 6" - 10,200 / 7"- 8,500

Item Numbers  Packaging and Availability

Item #SizeGritTypePkg. Qty.Availability
Z4045037DF4 1/2 x 7/836G27FDF5/101-14 DAYS
Z4045047DF4 1/2 x 7/840G27FDF5/101-14 DAYS
Z4045067DF4 1/2 x 7/860G27FDF5/101-14 DAYS
Z4045087DF4 1/2 x 7/880G27FDF5/101-14 DAYS
Z4045127DF4 1/2 x 7/8120G27FDF5/101-14 DAYS
Z4045039DF4 1/2 x 7/836G29FDF5/101-14 DAYS
Z4045049DF4 1/2 x 7/840G29FDF5/101-14 DAYS
Z4045069DF4 1/2 x 7/860G29FDF5/101-14 DAYS
Z4045089DF4 1/2 x 7/880G29FDF5/101-14 DAYS
Z4045129DF4 1/2 x 7/8120G29FDF5/101-14 DAYS
Z4050037DF5 x 7/836G27FDF5/101-14 DAYS
Z4050047DF5 x 7/840G27FDF5/101-14 DAYS
Z4050067DF5 x 7/860G27FDF5/101-14 DAYS
Z4050087DF5 x 7/880G27FDF5/101-14 DAYS
Z4050127DF5 x 7/8120G27FDF5/101-14 DAYS
Z4050039DF5 x 7/836G29FDF5/101-14 DAYS
Z4050049DF5 x 7/840G29FDF5/101-14 DAYS
Z4050069DF5 x 7/860G29FDF5/101-14 DAYS
Z4050089DF5 x 7/880G29FDF5/101-14 DAYS
Z4050129DF5 x 7/8120G29FDF5/101-14 DAYS

Add SAFE LOC (Patented), Quick Change

SAFE LOC is a 5/8″-11 threaded attachment for flap discs. Available for 4 1/2″, 5″, 6″ and 7″ discs with any backing type.

For Item with SAFE LOC Quick Change add S to the end of Item with 7/8″ Arbor Hole. e.g. Item: Z4045049 with 7/8″ AH will become Z4045049S with 5/8″-11 SAFE LOC.

For Item with 5/8″-11 Zinc Hub add H to the of Item with 7/8″ Arbor Hole. e.g. Item: Z4045049 with 7/8″ AH will become Z4045049H with 5/8″-11 Zinc Hub.

CATEGORIES

Premium quality Zirconia Flap Disc. Made with genuine VSM ZK765X  Zirconia Abrasive Material for best performance on all materials  and angle grinders. Fibreglass Backing. Shrink wrapped in 5/10s.

Recommended for frequent use by professionals who do not compromise on quality and are looking at great price over performance ratio.

ZeeCUT Flap Discs are manufactured using the highest quality Self-Sharpening Zirconia Alumina abrasive material.

Discs made with continuous self-sharpening High-Tech Zirconia Alumina grain, achieve extremely high cutting rates, long lifetimes, better surface finish, and better economy.

buyersguide_abrasivematerial

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Heat treated steels
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Cast iron
  • Non-Ferrous metals

Depending on the grinding angle and surface to be ground, Flap Discs are available in two types:

Type 27 – has flat surface and can achieve maximum efficiency when applied at a work angle of 0-15 deg angle. These discs are the most suitable for grinding flat surfaces.

t27-fd

Type 29 – has a slightly conical surface, for grinding at 10-25 deg angle. These discs are the most suitable for grinding contoured surfaces.

t29-fd

Specifications

SIZES4" / 4 1/2" / 5" / 6" / 7"TYPE:Flat (Type 27) / Conical (Type 29)
ABRASIVE MATERIAL:VSM Premium ZirconiaDENSITY:Standard
GRITS:24 / 36 / 40 / 60 / 80 / 120COLOUR:Blue
BACKING:FiberglassQUICK CHANGESAFE LOC / ZINC HUB
MAX RPM. (OD in inches - RPM)4" - 15,300 / 4 1/2" - 13,300 / 5" - 12,200 / 6" - 10,200 / 7"- 8,500

Item Numbers  Packaging and Availability

Item #SizeGritTypePkg. Qty.Availability
Z40400374" x 5/8"36G Z/AT27F5/101-14 DAYS
Z40400474" x 5/8"40G Z/AT27F5/101-14 DAYS
Z40400674" x 5/8"60G Z/AT27F5/101-14 DAYS
Z40400874" x 5/8"80G Z/AT27F5/101-14 DAYS
Z40401274" x 5/8"120G Z/AT27F5/101-14 DAYS
Z40400394" x 5/8"36G Z/AT29F5/101-14 DAYS
Z40400494" x 5/8"40G Z/AT29F5/101-14 DAYS
Z40400694" x 5/8"60G Z/AT29F5/101-14 DAYS
Z40400894" x 5/8"80G Z/AT29F5/101-14 DAYS
Z40401294" x 5/8"120G Z/AT29F5/101-14 DAYS
Z40450374 1/2" x 7/8"36G Z/AT27F5/101-14 DAYS
Z40450474 1/2" x 7/8"40G Z/AT27F5/101-14 DAYS
Z40450674 1/2" x 7/8"60G Z/AT27F5/101-14 DAYS
Z40450874 1/2" x 7/8"80G Z/AT27F5/101-14 DAYS
Z40451274 1/2" x 7/8"120G Z/AT27F5/101-14 DAYS
Z40450394 1/2" x 7/8"36G Z/AT29F5/101-14 DAYS
Z40450494 1/2" x 7/8"40G Z/AT29F5/101-14 DAYS
Z40450694 1/2" x 7/8"60G Z/AT29F5/101-14 DAYS
Z40450894 1/2" x 7/8"80G Z/AT29F5/101-14 DAYS
Z40451294 1/2" x 7/8"120G Z/AT29F5/101-14 DAYS
Z40500375" x 7/8"36G Z/AT27F5/101-14 DAYS
Z40500475" x 7/8"40G Z/AT27F5/101-14 DAYS
Z40500675" x 7/8"60G Z/AT27F5/101-14 DAYS
Z40500875" x 7/8"80G Z/AT27F5/101-14 DAYS
Z40501275" x 7/8"120G Z/AT27F5/101-14 DAYS
Z40500395" x 7/8"36G Z/AT29F5/101-14 DAYS
Z40500495" x 7/8"40G Z/AT29F5/101-14 DAYS
Z40500695" x 7/8"60G Z/AT29F5/101-14 DAYS
Z40500895" x 7/8"80G Z/AT29F5/101-14 DAYS
Z40501295" x 7/8"120G Z/AT29F5/101-14 DAYS
Z40600376" x 7/8"36G Z/AT27F5/101-14 DAYS
Z40600476" x 7/8"40G Z/AT27F5/101-14 DAYS
Z40600676" x 7/8"60G Z/AT27F5/101-14 DAYS
Z40600876" x 7/8"80G Z/AT27F5/101-14 DAYS
Z40601276" x 7/8"120G Z/AT27F5/101-14 DAYS
Z40600396" x 7/8"36G Z/AT29F5/101-14 DAYS
Z40600496" x 7/8"40G Z/AT29F5/101-14 DAYS
Z40600696" x 7/8"60G Z/AT29F5/101-14 DAYS
Z40600896" x 7/8"80G Z/AT29F5/101-14 DAYS
Z40601296" x 7/8"120G Z/AT29F5/101-14 DAYS
Z40700377" x 7/8"36G Z/AT27F5/101-14 DAYS
Z40700477" x 7/8"40G Z/AT27F5/101-14 DAYS
Z40700677" x 7/8"60G Z/AT27F5/101-14 DAYS
Z40700877" x 7/8"80G Z/AT27F5/101-14 DAYS
Z40701277" x 7/8"120G Z/AT27F5/101-14 DAYS
Z40700297" x 7/8"24G Z/AT29F5/101-14 DAYS
Z40700397" x 7/8"36G Z/AT29F5/101-14 DAYS
Z40700497" x 7/8"40G Z/AT29F5/101-14 DAYS
Z40700697" x 7/8"60G Z/AT29F5/101-14 DAYS
Z40700897" x 7/8"80G Z/AT29F5/101-14 DAYS
Z40701297" x 7/8"120G Z/AT29F5/101-14 DAYS

Add SAFE LOC (Patented), Quick Change

SAFE LOC is a 5/8″-11 threaded attachment for flap discs. Available for 4 1/2″, 5″, 6″ and 7″ discs with any backing type.

For Item with SAFE LOC Quick Change add S to the end of Item with 7/8″ Arbor Hole. e.g. Item: Z4045049 with 7/8″ AH will become Z4045049S with 5/8″-11 SAFE LOC.

For Item with 5/8″-11 Zinc Hub add H to the of Item with 7/8″ Arbor Hole. e.g. Item: Z4045049 with 7/8″ AH will become Z4045049H with 5/8″-11 Zinc Hub.

CATEGORIES

Circular saw blade for use on angle grinders for all round use. will work well in wood, masonry and metals.

The tungsten carbide teeth provides a prolonged lifetime for the saw blade, thereby resulting in an economical cutting rate.

Made in Denmark

Item Numbers  Packaging and Availability

Item #DescriptionSizePkg. Qty.Availability
DT310BLUE LABEL6 X 3/41STOCK