HT8 Drum Floor Sander

CATEGORIES

Features:

The HT8 is a 200mm (8″) high performance drum floor sander with clamp bar sanding drum technology. Available with multi-speed or single speed control.

The tool rental industry’s floor sander of choice, the clamp bar drum system allows the drum rubber to be easy serviced and replaced when needed minimising downtime and service costs.The unique drum rubber resists abrasion and damage caused by exposed nails while providing the feel and touch needed to sand a fine, score free finish.

Hiretech’s patented reversible clamp bar makes it easy for the user to fit abrasives, quickly and accurately. The drop forged clamp bar will not bend or distort over time ensuring that the abrasive paper is clamped securely in place at all times. The HT8’s unique lifting pin assembly lifts the clamp bar clear of the drum when fitting or removing abrasives.

The HT8 motor is a high speed heavy duty, self cooling four brush design. The motor will not stall or slow down under load when sanding with coarse grit abrasives, removing old surface finishes, deposits of wax or dirt. This high performance ensures a fast, consistent production rate making it easy for the user to get a regular and uniform finish across the whole floor area and throughout the complete range of abrasive grits.

Completely self contained with a high efficiency dust pickup, the HT8 breaks down into three simple component parts for easy transport. The high impact ABS injection moulded side guards and drum guard will not scar or scuff walls and protect the HT8 during transport.

The HT8 will sand all types of wooden floors including parquet to a fine score free finish. The HT8 can also be used on a wide range of other surfaces including some types of decking, fibre board, cork, engineered and composition floors.

  • No volt safety switch prevents accidental start-up.
  • Choice of single speed or multi-speed switch.
  • Powerful 4 pole (brush) motor geared 3:1, up to 4.5hp at the drum.
  • Dynamical balanced sanding drum.
  • Tough clamp bar style drum.
  • High impact resistant ABS guards.
  • High powered vacuum system.
  • Disposable paper or cloth dust bags.
  • 2 year warranty.

Item Numbers  Packaging and Availability

Item #Description
07006SINGLE-SPEED
07006MSMULTI-SPEED
CATEGORIES

CRIMPED, CARBON STEEL

GENERAL PURPOSE
Crimped wire brushes are suitable for cleaning large surfaces and conform
to irregular or contoured surfaces. Softer brushing action than knot wire brushes.

Suitable for the following materials:

  • Surface cleaning
  • Rust
  • Paint
  • Finishing
  • Light deburring

Item Numbers  Packaging and Availability

Item #SizeMax RPMWirePkg. Qty.Availability
EXYH305A3" x 5/8"-1114,0000.014"1STOCK
EXYH405A4" x 5/8"-119,0000.014"1STOCK

KNOTTED BANDED, CARBON STEEL

HIGH REMOVAL, LONG LIFE
A special design allows access to angles and flexible performance on any surface.

Suitable for the following materials:

  • Slag
  • Rust
  • Metal
  • Welds
  • Paint

Item Numbers  Packaging and Availability

Item #SizeMax RPMWirePkg. Qty.Availability
EXYG315A2-3/4"×5/8"-1114,0000.020"1STOCK
EXYG415A4"×5/8"-119,0000.020"1STOCK

For Item with 5/8″-11 Quick Change Hub remove 2 in the front and add L to the end of Item Number with 7/8″ Arbor Hole. e.g. Item: 2A704503 with 7/8″ AH will become A704503L with 5/8″-11 Quick Change Hub. Quick Change Hub available only for discs with 7/8 Arbor Hole.

CATEGORIES

Applications:

They are suitable for the decorative sanding of various types of metal, providing a homogeneous finish. They are also used for the removal of layers of oxide, the working of hard plastic materials and for particular types of wood.

Item Numbers  Packaging and Availability

Item #SizeGradeRPMPkg. Qty.Availability
FWF444034AC4 1/4 X 4 X 3/4A/O - Coarse3,7001STOCK
FWF444034AM4 1/4 X 4 X 3/4A/O - Medium3,7001STOCK
FWF444034SM4 1/4 X 4 X 3/4S/C - Medium3,700127-56
FWF444034SF4 1/4 X 4 X 3/4S/C - Fine3,700127-56
CATEGORIES

Premium Aluminum Oxide Grain, R Style (3M, Plastic).

Suitable for the following materials:

  • Carbon Steel
  • Cast Iron
  • Aluminum
  • Sheet Metal
  • Non Ferrous Metals
  • Plastic
  • Wood

Specifications

SIZES1" / 1 1/2" / 2" / 3" / 4"TYPE:R / S / P
ABRASIVE MATERIAL:Premium Aluminum OxideSHAPES:OTHER SHAPES AVAILABLE, PLEASE CONTACT CUSTOMER SERVICE
GRITS:60 / 120COLOUR:BROWN
BACKING:QUICK CHANGE HOLDER REQUIRED
MAX RPM. (OD in inches - RPM)1.5" - 25,000 / 2" - 25,000 / 3" - 20,000

Item Numbers  Packaging and Availability

Screw on thread on the back = R

Item #SizeGritTypePkg. Qty.Availability
A611506RO1 1/260A71150STOCK
A611512RO1 1/2120A71150STOCK
A612006RO260A71150STOCK
A612012RO2120A71150STOCK
A613006RO360A71125STOCK
A613012RO3120A71125STOCK

Please contact customer service for grits not listed above.

Not listed but also available:

  • 1″ and 4″ Mini Discs
  • Velcro style
  • 2 Ply Backing
  • Mini Discs with abrasive GRIT other than ones listed above
  • Retail packaged discs
  • Mini Discs shapes other than round
  • Mini Discs Hlders
CATEGORIES

Less flexible, more durable, aggressive and faster cutting Strip and Clean for tough jobs.

Suitable for the following materials:

  • Coating Removal
  • Welding Surface Preparation
  • Work On Fibreglass
  • Stone And Cement Cleaning
  • Ship Maintenance
  • Do It Yourself Projects
  • Coated Surface Preparation
  • Weld And Splatter Cleaning
  • Rust Removal
  • Dirt And Contamination Removal

Specifications

SIZES2" / 3" / 4" / 5"TYPE:R / RH / 27F
ABRASIVE MATERIAL:SHAPES:
GRITS:Black / PerpleCOLOUR:Black / Perple
BACKING:BACK-UP PAD NOT REQUIREDQUICK CHANGE:5/8-11 Quick Change Hub available for 7/8" AH

Item Numbers  Packaging and Availability

Item #SizeMax RPMFastener TypePkg. Qty.Availability
SC20PURR218,000R10STOCK
SC30PURR315,000R5STOCK
SC4012PUR4 x 1/2 x 1/411,000A/H10STOCK
SC4025PUR4 x 1 x 1/411,000A/H10STOCK
SC45DCPUR4 1/2 x 7/811,00027F5STOCK
SC45DCPURS4 1/2 x 5/8-1111,00027F5STOCK
SC50DCPUR5 x 7/89,80027F5STOCK
SC50DCPURS5 x 5/8-119,80027F5STOCK

Add SAFE LOC (Patented), Quick Change

SAFE LOC is a 5/8″-11 threaded attachment for flap discs. Available for 4 1/2″, 5″, 6″ and 7″ discs with any backing type.

For Item with SAFE LOC Quick Change add S to the end of Item with 7/8″ Arbor Hole. e.g. Item: SC4012PUR with 7/8″ AH will become Z5345049S with 5/8″-11 SAFE LOC.

For Item with 5/8″-11 Zinc Hub add H to the of Item with 7/8″ Arbor Hole. e.g. Item: SC4012PUR with 7/8″ AH will become Z5345049H with 5/8″-11 Zinc Hub.

Not listed but also available:

  • Sizes and shapes other than listed above.
  • Retail packaged discs.
CATEGORIES

Premium quality Ceramic Flap Disc. Made with genuine VSM Hi-Tech Ceramic Alumina grain for best performance on all materials  and angle grinders. Top coat abrasive material resist loading and act as a coolant. Fibreglass Backing. Shrink wrapped in 5/10s. Also available in white box of 5/10.

Recommended for use by demanding professionals who do not compromise on quality and performance. Great solution for all metals.  Extremely tough and long lasting in coarse grit. Use for heavy grinding, weld blending and chamfering on all steels and hard to grind materials.

Ceramic Grain-based products are ideal solutions where an aggressive cut and high performance are required.
Such products achieve extremely high stock removal and long life due to their continuous self-sharpening
characteristics. Ceramic grains are extremely hard, making products made with it suitable for grinding
very hard and heat treated metals. Products made with Ceramic Grain are safer to use during grinding due to the
minimal amount of sparks being produced.

hi-tech_ceramic_grain

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Titanium
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Non-Ferrous metals

Depending on the grinding angle and surface to be ground, Flap Discs are available in two types:

Type 27 – has flat surface and can achieve maximum efficiency when applied at a work angle of 0-15 deg angle. These discs are the most suitable for grinding flat surfaces.

t27-fd

Type 29 – has a slightly conical surface, for grinding at 10-25 deg angle. These discs are the most suitable for grinding contoured surfaces.

t29-fd

Specifications

SIZES4" / 4 1/2" / 5" / 6" / 7"TYPE:Flat (Type 27) / Conical (Type 29)
ABRASIVE MATERIAL:VSM Premium CeramicDENSITY:Standard
GRITS:36 / 40 / 60 / 80COLOUR:Red
BACKING:FiberglassQUICK CHANGESAFE LOC / ZINC HUB
MAX RPM. (OD in inches - RPM)4" - 15,300 / 4 1/2" - 13,300 / 5" - 12,200 / 6" - 10,200 / 7"- 8,500

Item Numbers  Packaging and Availability

For items not listed below please contact customer service. For some items minimum quantity and longer lead times apply.

Item #SizeGritTypePkg. Qty.Availability
C45450374 1/2" x 7/8"36G C/AT27F10STOCK
C45450474 1/2" x 7/8"40G C/AT27F10STOCK
C45450674 1/2" x 7/8"60G C/AT27F10STOCK
C45450874 1/2" x 7/8"80G C/AT27F10STOCK
C45450394 1/2" x 7/8"36G C/AT29F10STOCK
C45450494 1/2" x 7/8"40G C/AT29F10STOCK
C45450694 1/2" x 7/8"60G C/AT29F10STOCK
C45450894 1/2" x 7/8"80G C/AT29F10STOCK
C45500375" x 7/8"36G C/AT27F10STOCK
C45500475" x 7/8"40G C/AT27F10STOCK
C45500675" x 7/8"60G C/AT27F10STOCK
C45500875" x 7/8"80G C/AT27F10STOCK
C45500395" x 7/8"36G C/AT29F102-7 DAYS
C45500495" x 7/8"40G C/AT29F102-7 DAYS
C45500695" x 7/8"60G C/AT29F102-7 DAYS
C45500895" x 7/8"80G C/AT29F102-7 DAYS
C45600376" x 7/8"36G C/AT27F102-7 DAYS
C45600476" x 7/8"40G C/AT27F102-7 DAYS
C45600676" x 7/8"60G C/AT27F102-7 DAYS
C45600876" x 7/8"80G C/AT27F102-7 DAYS
C45600396" x 7/8"36G C/AT29F102-7 DAYS
C45600496" x 7/8"40G C/AT29F102-7 DAYS
C45600696" x 7/8"60G C/AT29F102-7 DAYS
C45600896" x 7/8"80G C/AT29F102-7 DAYS
C45700377" x 7/8"36G C/AT27F102-7 DAYS
C45700477" x 7/8"40G C/AT27F102-7 DAYS
C45700677" x 7/8"60G C/AT27F102-7 DAYS
C45700877" x 7/8"80G C/AT27F102-7 DAYS
C45700397" x 7/8"36G C/AT29F102-7 DAYS
C45700497" x 7/8"40G C/AT29F102-7 DAYS
C45700697" x 7/8"60G C/AT29F102-7 DAYS
C45700897" x 7/8"80G C/AT29F102-7 DAYS

Add SAFE LOC (Patented), Quick Change

SAFE LOC is a 5/8″-11 threaded attachment for flap discs. Available for 4 1/2″, 5″, 6″ and 7″ discs with any backing type.

For Item with SAFE LOC Quick Change add S to the end of Item with 7/8″ Arbor Hole. e.g. Item: C5545049 with 7/8″ AH will become C5545049S with 5/8″-11 SAFE LOC.

For Item with 5/8″-11 Zinc Hub add H to the of Item with 7/8″ Arbor Hole. e.g. Item: C5545049 with 7/8″ AH will become C5545049H with 5/8″-11 Zinc Hub.

CATEGORIES

Built for demanding grinding applications, CERAMIC HD (JUMBO) delivers aggressive cutting performance with extended service life. Made with premium 100% ceramic VSM German abrasive material, it provides consistent material removal and long-lasting performance on tough metalworking applications. Its jumbo construction offers increased abrasive material for greater durability and productivity.

Constructed with a durable fiberglass backing, CERAMIC HD (JUMBO) provides excellent strength and stability during heavy grinding. Available in T27 and T29 configurations, with grit options from 36 to 120 to accommodate aggressive stock removal through finer finishing applications.

Available in 4-1/2″, 5″, and 6″ sizes with 7/8″ arbor hole, 5/8″-11 patented plastic SafeLOC, or 5/8″-11 metal zinc HUB options. Economy packaging is available shrink-wrapped in packs of 5 or 10.

hi-tech_ceramic_grain

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Titanium
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Non-Ferrous metals

Depending on the grinding angle and surface to be ground, Flap Discs are available in two types:

Type 27 – has flat surface and can achieve maximum efficiency when applied at a work angle of 0-15 deg angle. These discs are the most suitable for grinding flat surfaces.

t27-fd

Type 29 – has a slightly conical surface, for grinding at 10-25 deg angle. These discs are the most suitable for grinding contoured surfaces.

t29-fd

Specifications

SIZES4 1/2 X 7/8, 5 X 7/8TYPE:Flat (Type 27) / Conical (Type 29)
ABRASIVE MATERIAL:VSM Premium CeramicDENSITY:Standard
GRITS:36/40/60/80/120COLOUR:Red
BACKING:FiberglassQUICK CHANGESAFE LOC / ZINC HUB
MAX RPM. (OD in inches - RPM)4" - 15,300 / 4 1/2" - 13,300 / 5" - 12,200 / 6" - 10,200 / 7"- 8,500

Item Numbers  Packaging and Availability

For items not listed below please contact customer service. For some items minimum quantity and longer lead times apply.

Item #SizeGritTypePkg. Qty.Availability
C58450374 1/2 x 7/836G27F5/101-14 DAYS
C58450474 1/2 x 7/840G27F5/101-14 DAYS
C58450674 1/2 x 7/860G27F5/101-14 DAYS
C58450874 1/2 x 7/880G27F5/101-14 DAYS
C58451274 1/2 x 7/8120G27F5/101-14 DAYS
C58450394 1/2 x 7/836G29F5/101-14 DAYS
C58450494 1/2 x 7/840G29F5/101-14 DAYS
C58450694 1/2 x 7/860G29F5/101-14 DAYS
C58450894 1/2 x 7/880G29F5/101-14 DAYS
C58451294 1/2 x 7/8120G29F5/101-14 DAYS
C58500375 x 7/836G27F5/101-14 DAYS
C58500475 x 7/840G27F5/101-14 DAYS
C58500675 x 7/860G27F5/101-14 DAYS
C58500875 x 7/880G27F5/101-14 DAYS
C58501275 x 7/8120G27F5/101-14 DAYS
C58500395 x 7/836G29F5/101-14 DAYS
C58500495 x 7/840G29F5/101-14 DAYS
C58500695 x 7/860G29F5/101-14 DAYS
C58500895 x 7/880G29F5/101-14 DAYS
C58501295 x 7/8120G29F5/101-14 DAYS

Add SAFE LOC (Patented), Quick Change

SAFE LOC is a 5/8″-11 threaded attachment for flap discs. Available for 4 1/2″, 5″, 6″ and 7″ discs with any backing type.

For Item with SAFE LOC Quick Change add S to the end of Item with 7/8″ Arbor Hole. e.g. Item: C5545049 with 7/8″ AH will become C5545049S with 5/8″-11 SAFE LOC.

For Item with 5/8″-11 Zinc Hub add H to the of Item with 7/8″ Arbor Hole. e.g. Item: C5545049 with 7/8″ AH will become C5545049H with 5/8″-11 Zinc Hub.

CATEGORIES

Premium quality Ceramic Mini Flap Disc. Made with High-Tech ceramic Abrasive Material for best performance on all materials. Top coat abrasive material resist loading and act as a coolant. Quick Change type “R” or “S” Plastic Backing. Packaged 10 per box.

Ideal for tight space. Recommended for demanding professionals who do not compromise on quality. Extremely tough and long lasting. Use for heavy grinding, weld blending and chamfering on all steels and hard to grind materials.

Mini FD require Rubber Holders. See Accessories.

quick_change_holders

Ceramic Grain-based products are ideal solutions where an aggressive cut and high performance are required. Such products achieve extremely high stock removal and long life due to their continuous self-sharpening characteristics. Ceramic grains are extremely hard, making products made with it suitable for grinding very hard and heat treated metals. Products made with Ceramic Grain are safer to use during grinding due to the minimal amount of sparks being produced.

hi-tech_ceramic_grain

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Titanium
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Non-Ferrous metals

Mini Flap Discs are available in two quick change versions:

Type “R” – Quick Change “R” Style (3M, Plastic). Easily attaches to and removes
from Quick Change Type “R” Holder.

Type “S” – Quick Change “S” Style (Norton, Metal). Easily attaches to and removes
from Quick Change Type “S” Holder.

type_s_mfd

Specifications

SIZES2" / 3"TYPE:Flat (Type 27)
ABRASIVE MATERIAL:Premium CeramicDENSITY:Standard
GRITS:36 / 40 / 60 / 80 / 120COLOUR:Red
BACKING:PlasticQUICK CHANGER / S
MAX RPM. (OD in inches - RPM)2" - 25,000 / 3" - 20,000

Item Numbers  Packaging and Availability

For items not listed below please contact customer service. For some items minimum quantity and longer lead times apply.

Item #SizeGritTypePkg. Qty.Availability
C562003R2" x "R"36G C/AR101-4 WEEKS
C562004R2" x "R"40G C/AR101-4 WEEKS
C562006R2" x "R"60G C/AR101-4 WEEKS
C562008R2" x "R"80G C/AR101-4 WEEKS
C562012R2" x "R"120G C/AR101-4 WEEKS
C562003S2" x "S"36G C/AS101-4 WEEKS
C562004S2" x "S"40G C/AS101-4 WEEKS
C562006S2" x "S"60G C/AS101-4 WEEKS
C562008S2" x "S"80G C/AS101-4 WEEKS
C562012S2" x "S"120G C/AS101-4 WEEKS
C563003R3" x "R"36G C/AR101-4 WEEKS
C563004R3" x "R"40G C/AR101-4 WEEKS
C563006R3" x "R"60G C/AR101-4 WEEKS
C563008R3" x "R"80G C/AR101-4 WEEKS
C563012R3" x "R"120G C/AR101-4 WEEKS
C563003S3" x "S"36G C/AS101-4 WEEKS
C563004S3" x "S"40G C/AS101-4 WEEKS
C563006S3" x "S"60G C/AS101-4 WEEKS
C563008S3" x "S"80G C/AS101-4 WEEKS
C563012S3" x "S"120G C/AS101-4 WEEKS
CATEGORIES

BACKUP PADS

Heavy duty rubber pad, aluminum core with removable steel shank. For use with QCD and SCD,
R Style (3M, Plastic).

Item #SizeSpecMax RPMPkg. Qty.Availability
294500HD4 1/2" X 5/8"-11Medium11,0001 STOCK
295000HD5" X 5/8"-11Medium10,0001 STOCK
297000HD7" X 5/8"-11Medium11,0001 STOCK
294500N4 1/2" X 5/8"-11 NUTMedium10,0001 STOCK
295000N5" X 5/8"-11 NUTMedium8,6001 STOCK
EXK1003AP4 1/2" X 5/8"-11 NUTSoft11,0001 STOCK
EXK1004AP5" X 5/8"-11 NUTSoft10,0001 STOCK
EXK1006AP7" X 5/8"-11 NUTSoft8,6001 STOCK
11503004NUT FOR 294500HD1 STOCK
11503003NUT FOR 295000HD AND 297000HD1 STOCK

VELCRO BACKUP PADS

Item #SizeMax RPMPkg. Qty.Availability
2BPVEL5X445 X 44H 12,0001 STOCK
2BPVEL6X526 X 52H12,0001 STOCK

Notes:

Other size and types available upon request

CATEGORIES

High Density Unitized Wheels are a combination of several layers of non woven abrasive material compressed and impregnated with resin. All the international grains with different diameters and thicknesses are available. These wheels have been developed for cleaning and finishing operations and they are highly conformable while maintaining durability. They will not contaminate the work surface. They can be installed on normal portable electro-tools or with an extension arm in order to reach the most difficult areas.

Applications:

  • Polishing welds on stainless steel
  • Removing excessive binders after the cooling process
  • Removing oxidations
  • Deburring after cutting and removing imperfections on soft surfaces
  • Polishing threads and sharp edges
  • Polishing precision materials and polishing burnished welds
  • Polishing and finishing dies
  • Special working on alloys, aluminium, titanium and other materials

MIRROR CUT SMALL DIAMETER UNITIZED WHEELS

Item #SizeFastener StyleGradePkg. Qty.Availability
UWA2006MMDA2 X 1/4 X 1/41/4" ARBORA-MEDIUM10STOCK
UWA2010MMDA2 X 3/8 X 1/41/4" ARBORA-MEDIUM10STOCK
UWA2006CMDA2 X 1/4 X 1/41/4" ARBORA-COARSE10STOCK
UWS2006FMDA2 X 1/4 X 1/41/4" ARBORS-FINE10STOCK
UWS2010FMDA2 X 3/8 X 1/41/4" ARBORS-FINE10STOCK
UWA3006MMDA3 X 1/4 X 1/41/4" ARBORA-MEDIUM10STOCK
UWA3006CMDA3 X 1/4 X 1/41/4" ARBORA-COARSE10STOCK
UWS3006FMDA3 X 1/4 X 1/41/4" ARBORS-FINE10STOCK

Not listed but also available:

  • Sizes, thickness and shapes other than listed
  • Grades and Density other than listed
  • Arbors

Please contact customer service for item numbers, price and delivery.